59
VARIOUS
FUNCTIONS AND
OPERATIONS
English
Highlight operations
When you press the [
] button on the remote control while the output image is Camera
Image or SD Mode, the highlight display uses the darkness and size set previously.
You can move the highlighted area using the [
], [ ], [ ]. and [ ] buttons on the remote
control. The highlight display is cleared when you press the [
] button on the remote
control again.
■
• The Highlight function cannot be used when the output image is PC.
• In the optical zoom range, the highlight size remains the same. In the digital zoom
range, the highlight size expands and contracts depending on the magnification ratio.
•
Cannot perform a capture of a highlighted image.
• When the highlight size is selected from the OSD menu, the highlight size currently
displayed returns to the initial settings.
To Next Page
Loading...
Need help?
General
