Setting Up
1
Turn the camera column in the
direction shown in the figure.
2
Rotate the camera head.
• Never turn the column in the opposite direction.
• Be sure to hold the column when turning it.
Never hold the camera head.
• Carry the product by holding the lower part
of the main unit in both hands. Never hold the
product by the column or the camera head.
•
Pay attention to prevent the camera head from
knocking against a desk or any hard object.
SETTING UP
• Proper set up position of the camera head is
as shown in the figure on the right. Never apply
excessive force to the camera.
To Next Page
Loading...
Need help?
General
