n
Adjusting Zoom
By rotating the zoom dial on the main unit, you can adjust the size of the zoomed image.
n
Closing microscope mode
From the OSD, select [Microscope] → [Off].
• To return to Regular mode after using the microscope, set [Set]
→
[Off] in the OSD.
• When setting [Set]
→
[Off] in the OSD, [Image Mode] returns to the [Image Mode]
selected before changing to the microscope mode.
•
In Microscope Mode, the brightness does not change even if you press the
[BRIGHTNESS
]/[BRIGHTNESS
] button on the operating panel.
To Next Page
Loading...
