48 BA-en-3041-2008_PC
• Selecting the Release options
The 12th LED of the bar indicates the selection of the release option. The
currently selected option is shown on the left. The selection can be chan-
ged with the + and - keys. Only one release option can be selected at any
time. Press the OK key to confirm your selection.
LED 1: The software release has been deactivated.
LED 2: Automatic software release
LED 3: Release: analog setpoint
LED 4: Release: integrated control elements
keypad button "ON/OFF"
LED 5: Release: CANopen® interface
LED 6: Release: Ethernet-based field bus interface
Fig. 27:
Image detail:
"release option"
with illuminated
12th LED
Z-116036dy_6
Fig. 28:
Image detail:
"release option"
with illuminated
12th LED
for
"System Master"
Z-116036dy_16
To Next Page
Loading...
