BA-en-3041-2008_PC 47
• Selecting the Charge mode
The 11th LED from the left on the bar lights up. Use the + and - buttons to
select “voltage-constant” or “current-constant” charging. The voltage-
constant mode is indicated by the first LED on the left, the current-
constant mode by the LED to the right of it. Press the OK button to confirm
the selection.
Fig. 25:
Image detail:
"voltage- or
current-constant"
with illuminated
11th LED
Z-116036dy_5
Fig. 26:
Image detail:
"voltage- or
current-constant"
with illuminated
11th LED for
"System Master"
Z-116036dy_15
To Next Page
Loading...
