46 BA-en-3041-2008_PC
• Selecting the Discharge mode
only for variants with integrated active discharge
The 10th LED from the left on the bar lights up. Use the + and - buttons to
select “passive discharge” or “active discharge”. The passive discharge
mode is indicated by the first LED on the left, the active discharge mode
by the LED to the right of it. Press the OK button to confirm the selection.
Fig. 23:
Image detail:
"passive or active
discharge" with
illuminated 10th
LED
Z-116036dy_12
Fig. 24:
Image detail:
"passive or active
discharge" with
illuminated 10th
LED for
"System Master"
Z-116036dy_14
To Next Page
Loading...
