BA-en-3041-2008_PC 45
The currently selected item of the Setup menu is indicated by an illumina-
ted LED in the right part of the LED bar. The left part indicates the current
setting with an illuminated LED.
• Starting the Setup menu
Press and hold the Setup button until both LEDs, kV and mA, flash yellow
together. Press the OK button to go to the next setting “Operating mode”.
Fig. 21:
Image detail:
"Start setup menu "
with illuminated
mA and kV LED
Z-116036dy_4
Fig. 22:
Image detail:
"Start setup menu "
with illuminated
mA and kV LED
for
"System Master"
Z-116036dy_13
To Next Page
Loading...
