32
N.B. To access the Configuration menu it is always necessary to enter the PIN code.
Once the PIN has been correctly entered the monitor will display the Configuration menu (fig. 35)
Changing/associating a new ID with the video door entry unit.
With this procedure, you can assign the video door entry unit with a new ID that is different to the one previ-
ously associated.
• From the Configuration menu, use B and C to select the icon
and tap the softkey D.
The video door entry unit enters into "communication" with the panel and the initialization phase is started
(fig. 36) in a similar way as illustrated in par. "Switching on the video door entry unit for the first time".
Figure 35 - Configuration menu
Figure 34 - Entering PINFigure 33 - Entering PIN digit
Confi guration of the video door entry unit
To Next Page
Loading...
Need help?
General
