Elvox 5721 - Integrating the Video Door Entry Unit with the By-Me System; Installation Rules and Regulatory Compliance

63
Installation rules and compliance with regulations
Integrating the video door entry unit with the By-me system.
The video door entry unit 5721 is designed to be incorporated into the By-me home automation system by
adding the module 01965 (control of lights and blinds, intrusion detection alarm system, temperature control,
load control, automation, etc.).
If the video door entry unit is also connected to the automation system, the appliance will be in home auto-
mation mode and will switch onto video door entry mode every time there is an external call or when the user
activates it via the navigation menus on the By-me home automation side.
Integrating the home automation module 01965 requires using a supplementary power supply art. 6923.
Installation rules.
Installation should be carried out in compliance with the current regulations regarding the installation of electri-
cal systems in the country where the products are installed.
Regulatory compliance.
EMC directive.
Standards EN 50428, EN 50486, EN 50428, EN 50491.