65
Glossary
Master.
Typically we talk about the “Master Panel” that refers to the main panel (that must be unique in the whole sys-
tem) always identified with ID equal to 1.
Slave.
Secondary object in relation to the master. If we talk about a “Slave Panel” the secondary panels of the system
are identified with an ID other than 1.
Basic programming.
Programming the main functions of a device Generally, this programming can be done without the aid of addi-
tional instruments such as programmers or PCs (some settings can be made directly by the user).
Advanced programming.
Programming the optional functions of a device done only by the installer with the aid of additional tools such as
programmers or PCs equipped with dedicated software.
To Next Page
Loading...
