2-6
EMC CLARiiON Server Support Products for Windows Installation Guide
Installing and Using the Navisphere Storage System Initialization Utility
Using the Navisphere Storage System Initialization Utility
You run the Navisphere Storage System Initialization Utility from a
host on which it is installed or from the server support CD.
To run the utility from a host
To start the utility from the default installation directory, select Start >
Programs > EMC > Navisphere > Navisphere Storage System
Initialization Utility. For more information on using the Navisphere
Storage System Initialization Utility, click Help from the wizard's
Help menu.
To run the utility from the CD
1. Log in to the Windows server as the administrator or someone
who has administrative privileges.
2. In the server’s drive, insert the server support CD that shipped
with your storage system or your upgrade kit (for AX-Series
systems upgrading to Navisphere Manager).
The server support menu opens.
If you do not see the server support menu, follow these steps to
open it:
a. From the Windows taskbar, select
Start > Run
b. In the Run dialog box, enter the following program name, and
then click OK:
drive:\CXSeries.exe
or
drive:\AXSeries.exe
where drive is the letter for the CD drive.
3. From the main menu select Run Products from CD.
The RUN PRODUCTS page opens.
4. Select Navisphere Storage System Initialization Utility.
To Next Page
Loading...
