Using the Host Agent
3-13
Installing and Using the Navisphere Host Agent or Server Utility
Stopping the Host Agent service
To stop the Host Agent service, do the following:
1. At the Windows server, log in as the administrator or the
equivalent.
2. From the desktop, right-click My Computer and select
Manage > Services and Applications > Services
The Services pane opens.
3. In the Services pane, right-click Navisphere Agent and select
Stop.
4. If asked to confirm your request to stop the Agent service, click
Yes, and close the Services pane or dialog box.
Configuring storage systems
The next step is to configure the storage systems connected to the
server. EMC recommends that you use Navisphere Manager, instead
of the CLI, to configure storage systems, as described in the EMC
Navisphere Manager Administrator’s Guide.
To Next Page
Loading...
