Installing the Navisphere Host Agent
3-9
Installing and Using the Navisphere Host Agent or Server Utility
c. On the second line, type the IP address that you want to
display in Navisphere.
d. Save the file and then stop and start the Agent.
What next? What you do next depends on whether you will use Navisphere
Manager to manage the storage systems connected to the server.
Using Manager — If you are setting up a new server, go to the section
Starting the Host Agent service on page 3-12. If you are just upgrading
the Host Agent or CLI on an existing system, you have finished the
upgrade.
Using CLI — Continue to the section Starting the Host Agent service
for information on how you can monitor storage-system events.
To Next Page
Loading...
