EMC Connectrix B Series

144
EMC Connectrix B Series v6.2 ED-DCX-4S-B Hardware Reference Manual
Specifications
General specifications
The ED-DCX-4S-B is compliant with United States and International
safety and EMC (Electromagnetic Compatibility) standards. Table 15
lists the general specifications for the ED-DCX-4S-B.
Table 15 General specifications
Specification Description
Configurable port types F_Port, FL_Port, E_Port, VEX_Port, VE_Port, EX_Port, and M_Port
System architecture Nonblocking shared memory
System processor FreeScale 8548, 1.2 GHz
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signalling Interface standard)
Modes of operation Fibre Channel Class 2, Class 3, and Class F
Fabric initialization Complies with FC-SW 5.0
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of the FCA profile
Aggregate I/O bandwidth 3 Tbps per chassis
Port to port latency Less than 2 microseconds with no contention (destination port is free)
Routing capacity A minimum aggregate routing capacity of four million frames per second (for Class 2,
Class 3, and Class F frames in a 64-port switch)