160
EMC Connectrix B Series v6.2 ED-DCX-4S-B Hardware Reference Manual
Specifications
CE statement
This is a Class A product. In a domestic environment, this product
might cause radio interference, and the user might be required to take
corrective measures.
The standards compliance label on the product contains the CE mark
which indicates that this system conforms to the provisions of the
following European Council directives, laws, and standards:
◆ Electromagnetic Compatibility (EMC) Directive 2004/108EEC
◆ Low Voltage Directive (LVD) 73/23/EEC and the
Complementary Directive 93/68/EEC
◆ EN55022:2006 (European Emissions Requirements)
◆ EN55024:1998, +A1:2001 and +A2:2003 (European Immunity
Requirements)
◆ EN61000-3-2:2006/JEIDA (European and Japanese Harmonics
Spec)
◆ EN61000-3-3:1995, +A1:2001 and +A2:2005
Canadian
requirements
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations, ICES-003
Class A.
Laser compliance
This equipment contains Class 1 laser products and complies with
FDA Radiation Performance Standards, 21 CFR Subchapter I and the
international laser safety standard IEC 825-2.
Use only optical transceivers that are qualified by EMC and comply
with the FDA Class 1 radiation performance requirements defined in
21 CFR Subchapter I, and with IEC 825-2. Optical products that do
not comply with these standards might emit light that is hazardous to
the eyes.
Regulatory compliance standards
Table 23 on page 161 lists the regulatory compliance standards for
which the ED-DCX-4S-B is certified.
To Next Page
Loading...
Need help?
General
