Figure 2-6: Fluid Selection Tab
Note
The following example will show a flow configuration for an application with database gas
air as the process fluid and a Rosemount 405C Conditioning Orifice Plate as the primary
element. The procedure to configure an application with other fluids and other primary
elements will be similar to this example. Natural gases, custom liquids, and custom gases
require additional steps during the configuration. See Other fluid configurations for more
information.
Procedure
1. Engineering Assistant may open to the Preferences tab. Using the tabs at the top of
the screen, navigate to the Fluid Selection tab.
2. Expand the Gas category (select the + icon).
3. Expand the Database Gas category.
4. Select the appropriate fluid (Air for this example) from the list of database fluids.
Reference Manual Configuration
00809-0100-4803 October 2018
Emerson.com/Rosemount 17
To Next Page
Loading...
