Emerson Rosemount 3051S MultiVariable - Page 78

Table 3-1: Mounting Brackets (continued)
Options Description Mounting type Bracket material Bolt material
B2 Traditional flange
bracket
Panel Painted CS CS
B3 Traditional flange flat
bracket
2-in. pipe Painted CS CS
B7 Traditional flange
bracket
2-in. pipe Painted CS SST
B8 Traditional flange
bracket
Panel Painted CS SST
B9 Traditional flange flat
bracket
2-in. pipe Painted CS SST
BA Traditional flange
bracket
2-in. pipe SST SST
BC Traditional flange flat
bracket
2-in. pipe SST SST
Flange bolts
The Rosemount 3051SMV can be shipped with a coplanar flange or a traditional flange
installed with four 1.75-in. flange bolts. Mounting bolts and bolting configurations for the
coplanar and traditional flanges can be found in Cover installation. SST bolts supplied by
Emerson are coated with a lubricant to ease installation. CS bolts do not require
lubrication. No additional lubricant should be applied when installing either type of bolt.
Bolts supplied by Emerson are identified by their head markings:
A. Carbon Steel (CS) Head Markings
B. Stainless Steel (SST) Head Markings
C. Alloy K-500 Head Marking
Note
The last digit in the F593_ head marking may be any letter between A and M.
Installation
Reference Manual
October 2018 00809-0100-4803
78 Rosemount 3051S Multivariable Transmitter