Figure 3-4: Typical Rosemount 3051SMV Installation Site
A. Rosemount 3051SMV
B. RTD cable
C. Pt 100 RTD sensor
D. Process connections
Mounting brackets
The Rosemount 3051SMV can be mounted to a 2-in. pipe or to a panel using an optional
mounting bracket. The B4 Bracket (SST [Stainless steel]) option is for use with the coplanar
flange process connection. shows bracket dimensions and mounting configurations for
the B4 option. Other bracket options are listed in Table 3-1. When installing the
transmitter to one of the optional mounting brackets, torque the bolts to 125 in-lb (0,9 N-
m).
Table 3-1: Mounting Brackets
Options Description Mounting type Bracket material Bolt material
B4 Coplanar flange
bracket
2-in. pipe/panel SST SST
B1 Traditional flange
bracket
2-in. pipe Painted CS (Carbon
steel)
CS
Reference Manual Installation
00809-0100-4803 October 2018
Emerson.com/Rosemount 77
To Next Page
Loading...
