RSTi-OM User Manual Section 10
GFK-3212A Jun 2021
PROFINET IO Reference Information
102
Section 10: PROFINET IO Reference Information
10.1 Read PDI Data of IO-Link Device in PLC
This section demonstrates how to configure the IO-Link input device on the PLC.
Figure 84: IO-Link Device Configuration in PLC
The IO-Link device, which supports 2 bytes of PDI data, is connected to IO-Link Port 5. The PDI data is
mapped into the process image at address %AI00001, as shown in the figure above. The IO controller
could read the current PDI data from the IO-Link device at %AI00001.
To Next Page
Loading...
