RSTi-OM User Manual Section 6
GFK-3212A Jun 2021
IO-Link Master Port Configuration
60
6.4 Modbus/TCP Settings Configuration Page
You can use the Configuration | Modbus/TCP Settings page to configure Modbus/TCP with the IO-
Link Master. Additional Modbus information is available in the following sections:
•
Section 11: Modbus/TCP Interface
•
Section 13: Functionality Descriptions
Figure 43: Modbus/TCP Settings
Note: Modbus is disabled by default. To use Modbus, click the EDIT button and select Enable.
To Next Page
Loading...
