EasyManua.ls Logo

Emerson RSTi-OM - Assign IP Address Statically Using the Web Page

Emerson RSTi-OM
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 22
Assign IP Address Statically Using the Web Page
You can use the following procedure to configure a static IP address. The IOLM web interface switches
to the new IP address immediately.
Note: The IOLM default IP address is: 192.168.11.202 and the subnet mask is 255.255.255.0. You
may need to change your laptop or PC IP address range to access the IOLM web interface.
1. Open a web browser and enter the IOLM IP address.
2. Click Configuration | Network.
3. Click the EDIT button.
4. If necessary, change the IP Type to static.
5. Enter an IP address, subnet mask, and gateway address.
Figure 16: Enter IP Address

Table of Contents

Other manuals for Emerson RSTi-OM

Related product manuals