RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 24
3.5 Device Name Assignment
Use one of the following methods to configure the Device Name.
• PAC Machine Edition & DCP tool
• Web interface - see Section 3.5.2, Using the Web Interface to Assign the Device Name for
information about using the IOLM Configuration | PROFINET IO page.
3.5.1 Assign the Device Name in PAC Machine Edition
Use the DCP tool as mentioned in section 3.4.1 and assign the device name. The device name should
match with the Hardware Configuration for successful communication with the controller.
Example: The configured name in the DCP tool is rstiom-node1 (Figure 18).
Figure 18: Device Name
To Next Page
Loading...
