RSTi-OM User Manual Section 6
GFK-3212A Jun 2021
IO-Link Master Port Configuration
51
Section 6: IO-Link Master Port Configuration
This section discusses port configuration, which includes these topics:
• Preparing for Port Configuration
• IO-Link Configuration Page (Section 6.2)
• PROFINET IO Settings Configuration Page (Section 6.3)
• Modbus/TCP Settings Configuration Page (Section 6.4)
• OPC UA Settings Configuration Page (Section 6.5)
Note: See Section 3.7, Configuring IO-Link Ports for information about configuring dedicated
digital I/O ports.
Although you can make configuration changes using the web interface, PROFINET IO configuration
parameters overwrite the values on the following Configuration pages:
• IO-Link Settings
• PROFINET IO Settings
• Network Settings
6.1 Preparing for Port Configuration
Before beginning port configuration, you may want to verify that the connected device is functioning.
1. If necessary, log into the IO-Link Master.
2. Click Diagnostics| IO-Link Diagnostics.
3. Review the Port Status and IO-Link State.
To Next Page
Loading...
