RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 16
3.2 Installing the GSDML File
Use the following procedure to install the GSDML file for PROFINET IO.
Note: GSDML files are available at Emerson’s support site. Please see the links provided at the end of
this document.
1. Launch PAC Machine Edition.
2. From the Navigator right-click on the PROFINET or PNC in the Hardware Configuration of the
controller section and select Add IO-Device (Figure 7).
Figure 7: Installing the GSDML File
The PROFINET Device Catalog displays, select Have GSDML from the dialogue box. (Figure 8)
Figure 8: PROFINET Device Catalog
Navigate to the folder where the GSDML for IOLM is located, select the GSDML-xxxx.zip and click on
Open.
The GSDML file for RSTi-OM IOLM would then be successfully added to the PROFINET Device Catalog.
To Next Page
Loading...
