Emerson RSTi-OM - Export a Log File

RSTi-OM User Manual Section 14
GFK-3212A Jun 2021
Troubleshooting 150
14.4.2 Export a Log File
Use the following procedure to export a log file.
1. Open your browser and enter the IP address of the IO-Link Master.
2. Click Advanced and then LOG FILES.
3. Select the log file type from the drop-list.
4. Click the EXPORT button.
5. Click the Save button drop-list and click Save to save it to your user folder or Save as to browse
to or create a new folder in which to place the log file.
6. Depending on your browser, you may need to close the pop-up window.
Figure 107: Syslog