RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 21
4. Change IP Type from static to DHCP.
Figure 15: Select IP Type
5. Click the SAVE button.
Once DHCP is enabled, the IOLM attempts to obtain an IP address from a DHCP server. If a new IP
address is assigned by a DHCP server, then the IOLM switches to the new IP address immediately. This
may interfere with communications between the device and the IO controller.
The next configuration step is to assign the device name, go to Section 3.5, Device Name Assignment.
To Next Page
Loading...
