RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 19
Figure 13: RSTi-OM
Configure the Device Name or IP Address as desired, the configured Device Name or the IP address
should be matching with what had been configured in the PROFINET controller to successfully
establish the communication with the controller.
The subnet mask and gateway need to be configured to be within the subnet as the PROFINET
controller.
CAUTION
Check Firewall Settings
Please check the firewall setting if there are no devices listed when using PROFINET DCP. The DCP port
should be enabled/whitelisted in the firewall settings for listing the devices when scanned.
To Next Page
Loading...
