EMTELLE FIBREFLOW - Selection Charts to Help Define the Correct Closure for each Application

INNOVATION AND FLEXIBILITY
THE INSTALLATION AND MAINTENANCE TRAINING MANUAL
6.2 Selection charts to help defi ne the correct closure for each application.
Data Sheet Installation Instructions Blown Fibre Blown Mini-cable Branch Off Manifold Centre Blowing Splice Point Retro Fit Re-enterable LFH Version Available IP Rating Accessory Product Number
Application
Area
Tube Distribution
Closure (TDC)
7514 Campus FTTx
✔ ✔ ✔✔ ✔ ✔ ✔
67
Tube Distribution
Manifold (TDM)
7849 FTTx
✔ ✔ ✔ ✔ ✔ ✔
55
Y Branch
(3mm)
7954 FTTx
✔ ✔ ✔✔ ✔ ✔✔
52
Y Branch
(5mm)
9169 FTTx
✔ ✔ ✔ ✔ ✔ ✔✔
52
Y Branch
(Indoor)
9018 In
Building
✔ ✔ ✔ ✔ ✔ ✔
H Branch 9190 FTTx
✔ ✔ ✔✔ ✔ ✔ ✔
68
Customer Connection
Point (CCP)
9358 In
Building
✔
3A 7247 FTTx Metro
✔ ✔✔ ✔ ✔✔( ✔) ✔ ✔
68
Customer Lead In
Point (CLIP)
7500 FTTx
✔ ✔ ✔ ✔ ✔
55
Direct Bury Joint Kit
(DBJ)
7719 FTTx
Repair
✔ ✔ ✔ ✔
68
Direct Bury Joint Kit
(DBJ)
7720 FTTx
Repair
✔ ✔ ✔ ✔
68
H Closure tba FTTx
✔ ✔ ✔
41
Indoor Tube Flexibility
Point 3 Port (ITFP)
7258 In
Building
✔ ✔ ✔ ✔ ✔✔
55
Indoor Tube Flexibility
Point 4 Port (ITFP)
7217 In
Building
✔ ✔ ✔ ✔ ✔✔
55
Aerial Closure 9257 Aerial
✔ ✔ ✔ ✔ ✔ ✔
6 Closures And Their Selection
“This document is intended as a guide only. Whilst the information it contains is believed to be correct, Emtelle can take no responsibility for actions taken based on the information contained in this document. Emtelle reserves the
right to make changes to this document without notice. All sales of product are subject to Emtelle’s terms and conditions of sale only, which can be found on Emtelle’s website.”
46
INNOVATION AND FLEXIBILITY