Installation Cerabar PMP21 IO-Link
16 Endress+Hauser
A0024405
5.4 Post-mounting check
• Is the device undamaged (visual inspection)?
• Does the device comply with the measuring point specifications? For example:
• Process temperature
• Process pressure
• Ambient temperature
• Measurement range
• Are the measuring point identification and labeling correct (visual inspection)?
• Is the device adequately protected from precipitation and direct sunlight?
• Are the securing screws firmly tightened?
• Does the pressure compensation element point downwards at an angle or to the side?
• To prevent moisture from penetrating, ensure that the connecting cables/plugs are
pointing downwards.
To Next Page
Loading...
