Endress+Hauser Cerabar PMP21 - Index

Cerabar PMP21 IO-Link Index
Endress+Hauser 63
Index
A
Actual Diagnostics (STA) ......................46
Alarm current (FCU) ......................... 52
Application ................................. 8
Application Specific Tag ...................... 45
B
Back-to-box ............................... 60
C
CE mark (Declaration of Conformity) .............. 9
Cleaning .................................. 41
Configuration of a pressure measurement ......... 29
Configuring pressure measurement .............. 29
D
Damping (TAU) .............................50
Declaration of Conformity ...................... 9
Designated use .............................. 8
Detailed Device Status ........................ 46
Device Status ...............................46
Diagnosis
Symbols ................................37
Diagnostic event ............................ 38
Diagnostic events ........................... 37
Diagnostic message ..........................37
Disposal ............................... 41, 42
Document
Purpose ................................. 4
E
ENP_VERSION ............................. 45
Event text ................................. 38
Extended order code .........................45
Exterior cleaning ............................41
F
Field of application
Residual risks .............................8
Function Tag .............................. 45
Functional Safety Manual (FY) ...................5
H
HI Max value (maximum indicator) .............. 59
L
Last Diagnostic (LST) .........................46
LO Min value (minimum indicator) .............. 59
Local display
see Diagnostic message
see In alarm condition
Location Tag .............................. 45
M
Maintenance ...............................41
Menu
Overview ............................... 43
Parameter description ..................... 45
N
Nameplate ................................ 12
O
Operating menu
Overview ............................... 43
Parameter description ..................... 45
Operating Mode (FUNC) ................... 33, 48
Operational safety ............................9
P
Pressure applied for 4mA (GTL) .............. 34, 51
Pressure applied for 20mA (GTU) .............35, 52
Process fluids ............................... 8
Product safety ...............................9
Purpose of this document ...................... 4
R
Repair concept ............................. 42
Requirements for personnel .....................8
Reset to factory settings (RES) .................. 59
Revisioncounter (RVC) ....................... 59
S
Safety instructions
Basic ................................... 8
Safety Instructions (XA) ........................5
Simulation Current Output (OU2) ................47
Simulation Switch Output 1 (OU1) ............... 46
SSC1.1 Config. Hyst. ......................... 55
SSC1.1 Config. Logic ......................... 55
SSC1.1 Config. Mode ......................... 55
SSC1.1 Param. SP1 .......................... 54
SSC1.1 Param. SP2 .......................... 55
SSC1.2 Config. Hyst. ......................... 57
SSC1.2 Config. Logic ......................... 56
SSC1.2 Config. Mode ......................... 57
SSC1.2 Param. SP1 .......................... 56
SSC1.2 Param. SP2 .......................... 56
Status signals .............................. 37
Switchback delay time, output 1 (dR1) ............ 56
Switchback delay time, output 2 (dR2) ............ 57
Switching delay time, output 1 (dS1) ............. 55
Switching delay time, output 2 (dS2) ............. 57
T
Teach Result State ...........................54
Teach Select ............................... 54
Teach SP1 .................................54
Teach SP2 .................................54
Troubleshooting ............................ 37
U
Unit changeover (UNI) - µC-temperature .......... 48