Cerabar PMP21 IO-Link Description of device parameters
Endress+Hauser 59
14.3.2 System
Device Management
HI Max value (maximum indicator)
Navigation Parameter → System → Device Management → HI Max value (maximum indicator)
Description This parameter is used as the maximum indicator and makes it possible to call up
retroactively the highest value ever measured for pressure.
A pressure that is present for at least 2.5 ms is logged to the maximum indicator.
The maximum indicators cannot be reset.
LO Min value (minimum indicator)
Navigation Parameter → System → Device Management → LO Min value (minimum indicator)
Description This parameter is used as the maximum indicator and makes it possible to call up
retroactively the lowest value ever measured for pressure.
A pressure that is present for at least 2.5 ms is logged to the maximum indicator.
The maximum indicators cannot be reset.
Revisioncounter (RVC)
Navigation Parameter → System → Device Management → Revisioncounter (RVC)
Description Counter that indicates the number of parameter changes.
Reset to factory settings (RES)
Navigation Parameter → System → Device Management → Reset to factory settings (RES)
To Next Page
Loading...
