Cerabar PMP21 IO-Link Description of device parameters
Endress+Hauser 47
Options • OFF
• OU1 = low (OPN)
• OU1= high (CLS)
Simulation Current Output (OU2)
Navigation Diagnosis → Simulation Current Output (OU2)
Description Simulation affects the process data and the physical current output.
If a simulation is active, a warning to this effect is displayed so that it is obvious to the user
that the device is in the simulation mode. A warning is communicated via IO-Link (C485 -
simulation active). The simulation must be ended actively via the menu. If the device is
disconnected from the power supply during the simulation and then power is resupplied
afterwards, the simulation mode is not resumed, and instead the device continues
operation in the measuring mode.
Options • OFF
• 3.5 mA
• 4 mA
• 8 mA
• 12 mA
• 16 mA
• 20 mA
• 21.95 mA
To Next Page
Loading...
