Cerabar PMP21 IO-Link Overview of the operating menu
Endress+Hauser 43
13 Overview of the operating menu
Depending on the parameter configuration, not all submenus and parameters are
available. Information on this can be found in the parameter description under
"Prerequisite".
IO-Link Level 1 Level 2 Level 3 Details
Identification Serial Number -
Firmware Revision -
Extended Ordercode → 45
Product Name -
Product Text -
Vendor Name -
Hardware Revision -
ENP_VERSION → 45
Application Specific Tag → 45
Function Tag → 45
Location Tag → 45
Device Type -
Diagnosis Device Status → 46
Detailed Device Status → 46
Actual Diagnostics (STA) → 46
Last Diagnostic (LST) → 46
Simulation Switch Output (OU1) → 46
Simulation Current Output (OU2) → 47
Parameter Application Sensor Operating Mode (FUNC) → 33
Unit changeover (UNI) → 48
Zero point configuration (ZRO) → 31
Zero point adoption (GTZ) → 31
Damping (TAU) → 50
Current output Value for 4 mA (STL) → 33
Value for 20 mA (STU) → 34
Pressure applied for 4mA (GTL) → 34
Pressure applied for 20mA (GTU) → 35
Alarm current (FCU) → 52
Teach - Single Value Teach Select → 54
System Command → 54
Teach SP1 → 54
Teach SP2 → 54
Teach Result State → 54
Switching Signal Channels Switching Signal Channel 1.1 SSC1.1 Param. SP1 → 54
SSC1.1 Param. SP2 → 55
SSC1.1 Config. Logic → 55
SSC1.1 Config. Mode → 55
SSC1.1 Config. Hyst. → 55
To Next Page
Loading...
