Endress+Hauser Gammapilot M FMG60 - Page 27

Gammapilot M FMG60 PROFIBUS PA Operation
Endress+Hauser 27
LCD module VU331
ENDRESS + HAUSER
E
+–
1
2
3
4
5
A0018097
1 Operating keys
2 Bargraph
3 Symbols
4 Function name
5 Parameter ID number
Display symbols
The following table describes the symbols that appear on the liquid crystal display:
Symbol Meaning
ALARM_SYMBOL
This alarm symbol is displayed when the device is in an alarm condition. If the symbol flashes, this indicates
a warning.
LOCK_SYMBOL
This lock symbol is displayed when the device is locked, i.e. if no entries are possible.
COM_SYMBOL
This communication symbol is displayed when data transmission via HART, PROFIBUS PA or FOUNDATION
Fieldbus, for example, is in progress.
SIMULATION_SWITCH_ENABLE
This communication symbol is displayed when simulation in FOUNDATION Fieldbus is enabled via the DIP
switch.
Key functions
Operating key(s) Meaning
or Navigate upwards in the picklist
Edit the numeric values within a function
or Navigate downwards in the picklist
Edit the numeric values within a function