Endress+Hauser Micropilot FMR10 - Cantilever with Pivot; Installation Type Sensor Process Connection Rear Side

Accessories Micropilot FMR10
36 Endress+Hauser
12.4 Cantilever with pivot
12.4.1 Installation type sensor process connection rear side
3
1
2
A B
1
A0028885
 28 Installation type sensor process connection rear side
A Installation with cantilever and wall bracket
B Installation with cantilever and mounting frame
1 Cantilever
2 Wall bracket
3 Mounting frame
Cantilever (short) with pivot, sensor process connection on rear
585 (23)
200 (7.87)
M8
35 (1.4)
50
(2.0)
20 (0.8)
105 (4.1)
35
(1.4)
22
(0.9)
6.5
(0.3)
15
(0.6)
100 (3.9)
25
(1.0)
35 (1.4)
100 (3.9)75 (2.9)
250 (9.84)
20 (0.8)
75 (2.9)
2
(0.08)
2 (0.08)
A0037806
 29 Dimensions of cantilever (short) with pivot for sensor process connection on rear. Unit of
measurement mm (in)
Weight:
2.1 kg (4.63 lb)
Material
316L (1.4404)
Order number
71452315
• 35 mm (1.38 in) openings for all G 1" or MNPT 1" connections on rear
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery