Micropilot FMR10 Accessories
Endress+Hauser 45
12.8 Service-specific accessories
Applicator
Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum measuring device: e.g.
pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and parameters over
the entire life cycle of a project.
Applicator is available:
https://portal.endress.com/webapp/applicator
Configurator
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
The Configurator is available on the Endress+Hauser website: www.endress.com -> Click
"Corporate" -> Select your country -> Click "Products" -> Select the product using the filters
and the search field -> Open the product page -> The "Configure" button to the right of the
product image opens the Product Configurator.
W@M
Life cycle management for your plant
W@M supports you with a wide range of software applications over the entire process:
from planning and procurement, to the installation, commissioning and operation of the
measuring devices. All the relevant device information, such as the device status, spare
parts and device-specific documentation, is available for every device over the entire life
cycle.
The application already contains the data of your Endress+Hauser device. Endress+Hauser
also takes care of maintaining and updating the data records.
W@M is available:
www.endress.com/lifecyclemanagement
To Next Page
Loading...
