Micropilot FMR10 Operating menu
Endress+Hauser 63
13.3 "Diagnostics" submenu
Navigation Diagnostics
Actual diagnostics
Navigation Diagnostics → Actual diagnostics
Description Displays current diagnostic message. If several messages are active at the same time, the
messages with the highest priority is displayed.
Previous diagnostics
Navigation Diagnostics → Previous diagnostics
Description Displays the last diagnostic message, with its diagnostic information, which has been
active before the current message. The condition displayed may still apply.
Delete previous diagnostic
Navigation Diagnostics → Delete previous diagnostic
Description Delete previous diagnostic message? It is possible that the diagnostic message remains
valid.
Selection • No
• Yes
Factory setting No
Signal quality
Navigation Diagnostics → Signal quality
Description Displays the signal quality of the level echo. Meaning of the display options - Strong: The
evaluated echo exceeds the threshold by at least 10 dB. - Medium: The evaluated echo
exceeds the threshold by at least 5 dB. - Weak: The evaluated echo exceeds the threshold
by less than 5 dB. - No signal: The device does not find a usable echo. The signal quality
indicated in this parameter always refers to the currently evaluated echo, either the level
echo or the tank bottom echo. In case of a lost echo (Signal quality = No signal) the device
generates the following error message: Diagnostic echo lost = Warning (factory setting) or
Alarm, if the other option has been selected in Diagnostic echo lost.
To Next Page
Loading...
