Micropilot FMR62
Endress+Hauser 73
Test, certificate
Feature 580 "Test,
certificate"
Description
JA 3.1 Material certificate, wetted metal parts, EN10204-3.1 inspection certificate
JB Declaration of Conformity NACE MR0175, wetted metal parts
JD 3.1 Material certificate, pressurized parts, EN10204-3.1 inspection certificate
JE Declaration of Conformity NACE MR0103, wetted metal parts
JF Declaration of Conformity AD2000, wetted metal parts:
Material conformity for all metal wetted/pressurized parts according to AD2000 (data
sheets W2, W9, W10)
JG Declaration of Conformity AD2000, pressurized metal parts
JJ Declaration of Conformity FDA
JK Declaration of Conformity, TSE Certificate of Suitability
JL Declaration of Conformity EC1935/2004
KE Pressure test, internal procedure, inspection certificate
KI PMI test (XRF), internal procedure, inspection certificate
KV Declaration of Conformity ASME B31.3:
The construction, the material used, the pressure and temperature ranges and the
labeling of the devices meet the requirements of ASME B31.3
Test reports, declarations and inspection certificates are available in electronic format in the
W@M Device Viewer:
Enter the serial number from nameplate (www.endress.com/deviceviewer)
This concerns the options for the following order codes:
• 550 "Calibration"
• 580 "Test, certificate"
• 590 "Additional approval", option LW: "CoC-ASME BPE"
Hard-copy product
documentation
Hard-copy versions of the test reports, declarations and inspection certificates can also be order via
order code 570 "Service", option I7 "Hard-copy product documentation". The documents are then
supplied with the product.
To Next Page
Loading...
