Micropilot FMR62
72 Endress+Hauser
Feature 100 in the product structure Process connection
TFK Tri-Clamp ISO2852 DN70-76.1 (3"), PTFE>316L
THK Tri-Clamp ISO2852 DN101.6 (4"), PTFE>316L
• For some process connections which are not listed in the product structure a CRN approval is
available on request.
• CRN-approved devices bear the registration number CRN 0F19773.5C on the nameplate.
An additional pressure restriction applies for the device versions listed in the table below if they
are CRN-approved. The pressure range indicated in the "Process" section continues to apply for
device versions not listed in the table below.
Product Process connection
1)
Maximum pressure
FMR62 TFK: Tri-Clamp 3" 10 bar (145 psi)
THK: Tri-Clamp 4" 10 bar (145 psi)
1) Feature 100 of the product structure
To Next Page
Loading...
