Micropilot FMR62
Endress+Hauser 27
Installation
Installation conditions Orientation - Liquid media
A0016882
• Recommended distance A wall - nozzle outer edge: ~ 1/6 of the vessel diameter. However, the
device must not under any circumstances be mounted closer than 15 cm (5.91 in) to the tank wall.
• Not in the center (2) as interference can cause signal loss.
• Not above the filling curtain (3).
• The use of a weather protection cover (1) is recommended to protect the transmitter from direct
sunlight or rain.
To Next Page
Loading...
