Endress+Hauser Micropilot FMR62 - Dielectric Constant

Micropilot FMR62
Endress+Hauser 45
FMR62, flange or DIN11851 process connection, PTFE flush mount
p
-40
(-40)
+150
(+302)
+200
(+392)
0
(+32)
T
p
[°C]
([°F])
1
2
[bar] ([psi])
25 (362.6)
-1 (-14.5)
0 (0)
+100
(+302)
3
A0032184
 23 FMR62: Permitted range for process temperature and process pressure, flange or DIN11851 process
connection
1 Feature 90, seal, F5
2 Feature 90, seal, F6
3 Valid only for process connection < 6" (ANSI), DN150 (EN), 10K150A (JIS)
FMR62, flange or DIN11851 process connection
Feature 100 "Process connection" Feature 90
"Seal"
Process
temperature
range
Process pressure range
• AFK: NPS 2" Cl.150, PTFE > 316/316L
• AGK: NPS 3" Cl.150, PTFE > 316/316L
• AHK: NPS 4" Cl.150, PTFE > 316/316L
• ATK: NPS 4" Cl.300 PTFE > 316/316L
• CFK: DN50 PN10/16, PTFE > 316L
• CGK: DN80 PN10/16, PTFE > 316L
• CHK: DN100 PN10/16, PTFE > 316L
• KFK: 10K 50A, PTFE > 316L
• KGK: 10K 80A, PTFE > 316L
• KHK: 10K 100A, PTFE > 316L
• MRK: DIN11851 DN50 PN25 slotted-nut, PTFE
> 316L
• MTK: DIN11851 DN80 PN25 slotted-nut, PTFE
> 316L
F5, PTFE
cladded
–40 to +150 °C
(–40 to +302 °F)
p
rel
=
–1 to 25 bar
(–14.5 to 362.6 psi)
1)
F6, PTFE
cladded
–40 to +200 °C
(–40 to +392 °F)
• AJK: NPS 6" Cl.150, PTFE > 316/316L
• CJK: DN150 PN10/16, PTFE > 316L
• KJK: 10K 150A, PTFE > 316L
F5, PTFE
cladded
F6, PTFE
cladded
–40 to +100 °C
(–40 to +212 °F)
p
rel
=
–1 to 25 bar
(–14.5 to 362.6 psi)
F5, PTFE
cladded
100 to 150 °C
(302 to 392 °F)
p
rel
=
0 to 25 bar
(0 to 362.6 psi)
F6, PTFE
cladded
100 to 200 °C
(212 to 392 °F)
1) The pressure range may be reduced further if the device has a CRN approval
Dielectric constant
For liquids
ε
r
≥ 1.9
Please contact Endress+Hauser for applications with lower dielectric constants than indicated.
For dielectric constants (DC values) of many media commonly used in various industries refer
to:
• the Endress+Hauser DC manual (CP01076F)
• the Endress+Hauser "DC Values App" (available for Android and iOS)