Endress+Hauser Micropilot FMR62 - Page 44

Micropilot FMR62
44 Endress+Hauser
FMR62, Tri-Clamp 2" process connection
Feature 100 "Process
connection"
Feature 90
"Seal"
Process temperature
range
Process pressure range
Tri-Clamp ISO2852
TDK: DN40-51 (2")
F5, PTFE
cladded
–40 to +150 °C
(–40 to +302 °F)
p
rel
=
–1 to 16 bar (–14.5 to 232 psi)
1)
F6, PTFE
cladded
–40 to +200 °C
(–40 to +392 °F)
1) The pressure range may be reduced further if the device has a CRN approval
FMR62, Tri-Clamp 3" or Tri-Clamp 4" process connection
p
-40
(-40)
+150
(+302)
+200
(+392)
0
(+32)
T
p
[°C]
([°F])
1
2
[bar] ([psi])
14 (203)
-1 (-14.5)
0 (0)
A0032619
 22 FMR62: Permitted range for process temperature and process pressure, Tri-Clamp 3" or Tri-Clamp 4"
process connection
1 Feature 90, seal, F5
2 Feature 90, seal, F6
FMR62, Tri-Clamp 3" or Tri-Clamp 4" process connection
Feature 100 "Process
connection"
Feature 90
"Seal"
Process temperature
range
Process pressure range
Tri-Clamp ISO2852
• TFK: DN70-76.1 (3")
• THK: DN101.6 (4")
F5, PTFE
cladded
–40 to +150 °C
(–40 to +302 °F)
p
rel
=
–1 to 14 bar
(–14.5 to 203 psi)
1)
F6, PTFE
cladded
–40 to +200 °C
(–40 to +392 °F)
1) The pressure range may be reduced further if the device has a CRN approval