Endress+Hauser Mycom CLM 152 - 3.6 Instrument Versions

12
3.6 Instrument Versions
You can identify the instrument version by means of the order code on the nameplate and
the required power supply.
CLM152- MYCOM CLM 152
Conductivity and resistance measurement transmitter
Configuration and certificate
A1A 1-circuit; base version
A1C 1-circuit; feedback/hold contact/remote MR switching
A2A 2-circuit; base version
F1A 1-circuit; FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 2; NI outputs
F1B 1-circuit; 3 optocouplers/Chemoclean,
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 2; NI outputs
F1D 1-circuit; 3 optocouplers/Chemoclean/feedback/hold contact,
MR switching
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 2; NI outputs
F1G 1-circuit; feedback/hold contact/remote MR switching, Profibus,
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 2; NI outputs
F2B 2-circuit; 3 optocouplers/Chemoclean
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 2; NI outputs
G1A 1-circuit; FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 1; IS outputs
G1B 1-circuit; 3 optocouplers/Chemoclean,
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 1; IS outputs
G1D 1-circuit; 3 optocouplers/Chemoclean/feedback/hold contact,
MR switching
FM CL 1, Div 2; CL II/III Div 1;
CL. I Zone 1; IS outputs
G1G 1-circuit; feedback/hold contact/remote MR switching, Profibus,
FM CL. I, Div 2; CL II/III Div 1;
CL. I Zone 1; IS outputs
G2B 2-circuit; 3 optocouplers/Chemoclean,
FM CL. I, Div 2; CL II/III Div 1;
CL.I Zone 1; IS outputs
Power supply
1 Power supply: 115 V AC
8 Power supply: 24 V DC
Language version
A Language: D, E, F, I switchable
Measuring process/Feature
31 NPT 1/2 cable entry, contacting and toroidal
41 NPT 1/2 cable entry, contacting and toroidal with moisture protection
Mounting
A Without additional mounting kit
B With post mounting kit