Endress+Hauser Mycom CLM 152 User Manual

39
Main display: Resistance value measured in MWcm or kWcm
(large characters for reading from a distance)
Suppl. info: Measuring range (remote meas. range switching only)
Main display: Resistance value measured in MWcm or kWcm
Suppl. info: Measuring range (remote meas. range switching only)
Type of temperature compensation
Substance measured
Current compensation temperature
Main display: Resistance value measured in MWcm or kWcm
Suppl. info: Same as 2nd measured value display plus
contact states (limit contacter only)
Main display: Resistance value measured in MWcm or kWcm
Suppl. info: Measuring range (remote meas. range switching only)
Conductivity value measured
Main display: Resistance value measured in MWcm or kWcm
Same as third measured value display plus
conductivity value measured
Main display: Difference in resistance measured in MWcm or kWcm
(large characters for reading from a distance)
Suppl info: Measuring range (remote meas. range switching only)
Main display: Difference in resistance measured in MWcm or kWcm
Suppl. info: Measuring range (remote meas. range switching only)
Type of temperature compensation
Substance measured
Current compensation temperature
Main display: Difference in resistance measured in MWcm or kWcm
Suppl. info: Same as 2nd measured value display plus
contact states (limit contacter only)
Main display: Resistance value measured, channel 1
in MWcm or kWcm
Suppl. info: Same as third measured value display
Main display: Resistance value measured, channel 2
in MWcm or kWcm
Suppl. info: Same as third measured value display
One-
circuit
Difference
Resistance Measurement
1st meas.
value
display
2nd
meas.
value
display
3rd meas.
value
display
4th meas.
value
display
5th meas.
value
display
1st meas.
value
display
2nd
meas.
value
display
3rd meas.
value
display
4th meas.
value
display
5th meas.
value
display
6.6 Locking of Functions
The Mycom CLM 152 transmitter has two operating levels that are accessed by entering
four-digit numeric access codes:
 Operator (maintenance)
 Advanced (specialist)
Menu items that are not available at the current operating level are not displayed. If there
is no input in response to the code prompt or if the input is incorrect, the field can only be
exited with the MEAS key. The access codes are set in the System set-up menu group
(see chapter 7.1.3).
Note!
The instrument is supplied unlocked.
Figure 6.4
Code prompt

Endress+Hauser Mycom CLM 152 Specifications

General

Brand	Endress+Hauser
Model	Mycom CLM 152
Category	Transmitter
Language	English