41
7 Instrument Configuration
Note!
Refer to the last pages of these operating
instructions for an overview of the
Mycom menu structure.
® Set-up guide Guided run through the major menus + Chapter 5.2
® Short-cut to relays Hold on/off + Chapter 6.7
Manual relay operation,
Limit parameters
Start Chemoclean
® Commissioning (Start-up)
® System set-up Operating mode, cell type, 2nd current + Chapter 7.1
Locking codes
Output relays
General
® Current outputs Current output parameters + Chapter 7.2
Hold with last value/fixed value
® Temperature Temperature compensation + Chapter 7.3
Temperature compensation
automatic/manual
® Calibration Parameters for calibration + Chapter 7.4
® Cleaning function Parameters for cleaning function + Chapter 7.5
® Relay contacts All sub-groups for limit configuration + Chapter 8
To Next Page
Loading...
