15
4 Installation
4.1 Storage and Transport
The packaging material used to store or transport the instrument must provide shock and
moisture protection. Optimal protection is provided by the original packaging materials.
The ambient conditions also have to meet the requirements (see Technical Data).
4.2 Unpacking
Inspect for any damaged contents. The post office or freight carrier must be informed of
any damage and the supplier must be notified.
Check that the delivery is complete and corresponds to your order and the shipping
documents:
Quantity delivered
Instrument version according to the nameplate
Accessories (see chapter 3.7)
Operating instructions
Keep the original packaging materials for future storage or shipment of the instrument.
If you have any questions, please contact your supplier or the Endress+Hauser sales
office in your area (see the back cover of these operating instructions).
4.3 Mounting
Insert the screws in the mounting holes in the housing and secure the instrument as
shown in Figure 4.1.
The holes are covered with plastic caps.
Figure 4.1
Dimensions for wall
mounting
To Next Page
Loading...
