Endress+Hauser Mycom CLM 152 User Manual

97
Temperature sensor 2
PT 100
PT 1000 (only for
NTC 30 k d ifference)W
Temperature sensor 1
PT 100
PT 1000
NTC 30 kW
Namur contacts
NC contact
NO contact
Temperature sensor 2
(only for difference)
Start-up
End
Resume
Compensation temp. 1
(only with MTC)
Compensation temp. 2
(only for difference
and MTC)
Assign faults
to maintenance contact
to no contacts
Temperature setting
manual (MTC)
automatic (ATC)
Failure relay
Fleeting contact
Steady contact
Unit for temp. meas.
Celsius
Fahrenheit
Kelvin
Support points
Tc curve
Tc table
Tc table
tag number Profibus address
(only FCYP)
Contrast
Remote meas. range
switch-over (linear)
Meas. ranges 1-4
Meas. current
ranges 1-4
at 0/4 mA
Meas. current range
at 20 mA
Remote meas. range
switch-over (bilinear):
Meas. range 1-4
Temperature value
at 0/4 mA
Input contacts
(only with FCXI)
Limit
Hysteresis
Off delay NC contact
NO contact
On delay
Value at knee point
Meas. current range
at 20 mA
Temperatue value
at 20 mA
Interval cleaning
Week program
Cleaning cycle
Hour
Minute
Second
Set
Cancel
Day Mon=1 ... Sun=7
Number of starts
Next day
Cancel
Pre-rinse Clean Post-rinse No. of repetitions
No. of repetitions
without cleaning agent
Hold
on
off
Hold continuation
(only for Hold on)
Display cleaning period

Endress+Hauser Mycom CLM 152 Specifications

General

Brand	Endress+Hauser
Model	Mycom CLM 152
Category	Transmitter
Language	English