Endress+Hauser Proline Promag 50 - Software History

9 Trouble-shooting PROline Promag 50
104 Endress+Hauser
9.10 Software history
Software version /
date
Changes to software Changes to documentation
Amplifier:
V 1.00.00 / 04.2000 Original software.
Compatible with:
– FieldTool
– Commuwin II (version 2.05.03 and
higher)
– HART Communicator DXR 275
(from OS 4.6) with Rev. 1, DD 1.
−
V 1.01.00 / 08.2000 Software expansion
(functional adaptations)
none
V 1.01.01 / 09.2000 Software adaptation none
V 1.02.00 / 06.2001 Software expansion:
New functionalities
• General instrument functions
• “OED” software function
V 1.03.00 / 03.2002 Software expansion:
Suitability for custody transfer
measurement Promag 50/51
none
V 1.04.00 / 08.2002 Software adaptation /
software expansion
Special documentation:
• Current span NAMUR NE 43
• EPD (new mode)
• Failsafe mode function
• Acknowledge fault function
• Trouble-shooting function
• System and process error
messages
• Response of status output
V 1.06.00 / 10.2003 Software expansion:
New / revised functionalities
• Device functions in general
• Language groups
• Second Totalizer
• Adjustable backlight (display)
• Operation hours counter
• Access code for counter
• Reset function (fault history)
• Up-/download with FieldTool
Communication module (Inputs/Outputs)
V 1.00.00 / 04.2000 Original software –
V 1.01.00 / 09.2000 Software expansion
(functional adaptations)
none
V 1.02.00 / 06.2001 Software expansion:
New functionalities
“Pulse width” software function