Endress+Hauser Proline Promag 50 - 10.7 Dimensions Promag 50 H

PROline Promag 50 10 Technical data
Endress+Hauser 133
10.7 Dimensions Promag 50 H
Promag H / DN 2...25 (compact version)
Fig. 67: Dimensions Promag H / DN 2...25 (compact version, aluminum field housing)
Fig. 68: Dimensions Promag H / DN 2...25 (compact version, stainless-steel field housing)
DN PN ** DI L K M
[mm] [inch] [bar] [mm] [mm] [mm] [mm]
2
−
16/40 2.25 86 43 M 6x4
4
−
16/40 4.5 86 43 M 6x4
8
−
16/40 9.0 86 43 M 6x4
15
−
16/40 16.0 86 43 M 6x4
– 1" 16/40 22.6 86 53 M 6x4
25
−
16/40 26.0 86 53 M 6x4
Overall fitting length will depend on the process connections
→ Page 137 ff.
** The permissible nominal pressure depends on the process connection and seal:
– 40 bar: flange EN 1092-1 (DIN 2501), welded nipples for DIN EN ISO 1127 pipes and ODT
(with O-ring seal)
– 16 bar: all other process connections
Esc
E
- +
207
227
K
DI
L
187
168
160
317
65
252
M
F06-50Hxxxxx-06-00-xx-xx-001
220
K
DI
L
153
171
328
65
263
M
Esc
E
- +
F06-50Hxxxxx-06-00-xx-xx-002