Endress+Hauser Proline Promag 50 - 5.2 Brief Operating Instruction to the Function Matrix

5 Operation PROline Promag 50
62 Endress+Hauser
5.2 Brief operating instruction to the function matrix
!
Note!
• See the general notes on Page 63.
• Function descriptions → see the “Description of Device Functions” manual
1. HOME position → F → Enter the function matrix
2. Select a function group (e.g. CURRENT OUTPUT 1)
3. Select a function (e.g. TIME CONSTANT)
Change parameter / enter numerical values:
O S → select or enter enable code, parameters, numerical values
F → save your entries
4. Exit the function matrix:
– Press and hold down Esc key (X) for longer than 3 seconds → HOME position
– Repeatedly press Esc key (X) → return step by step to HOME position
Fig. 43: Selecting functions and configuring parameters (function matrix)
>3s
-
+
E
Esc
E
E
E
E
E E E E E
–
+
➁
➃
➂
➀
+
Esc
–
+
Esc
–
+
Esc
–
E
F06-x0xxxxxx-19-xx-xx-xx-000